3.0mm DIN Fiber Optic Field Assembly Connector
Field assembly connector is very easy installable and re-usable field assembly connector which the fiber can be connected/disconnected only by on/off of a small latch attached on connector body, which is composed of two parts of a connector body and a boot it is designed to have the structure and the function to construct the more economic FTTH network.
Advantages of Mechanical Splicer
Fiber to the x (FTTX) (also indicated as Fiber to the x) or fiber in the loop is an abbreviation and a term for any broadband network that uses optical fiber to give all or part of the local loop implemented for last mile telecommunications. Fiber optic cables can ensure much more data than copper cables, especially if we consider long distances.
Features / Benefits
● No need to use special Jig for assembling;
● Can be reusable about 10 times;
● Various cable can be acceptable with one type FAC (Ø250-900μm,1.6×2.0mm,2.0×3.0mm,3.0mm);
● RoHS compliant;
● Reusable termination capability [Up to 5 times];
● Easy to deploy fiber solution;
● High success rate of connections;
● Low Insertion & Back Reflection;
● No special tools required.
Application
● FTTH end user termination;
● Patch panels;
● Rapid repair of optical networks;
● Direct equipment termination.
Technical Parameter
| Category | Specification |
| Applicable for | Ф2.0 x 3.0mm Indoor Drop Cable |
| Fiber mode | 9/125μm Singlemode |
| Polish Type | APC / UPC |
| Dimension | 55mm |
| Housing | Green / Blue PC Plastic |
| Ferrule Material | Ceramic(Zirconia) |
| Operation time | S | About 50(no fiber cut) |
| Insertion Loss | dB | ≤ 0.50 |
| Insertion Loss Typical value | dB | ≤ 0.30 |
| Return Loss | dB | ≥ 45.0 |
| Fastening strength of naked fiber | N | ≥ 5 |
| Tensile strength | N | ≥ 50 |
| Reusable | Time | ≥ 10 times |
| Operating Temperature | ℃ | -40～+75 |
| On-line tensile strength (10N) | dB | ΔIL≤ 0.3 |
| Mechanical durability (500 times) | dB | ΔIL≤ 0.3 |
| Drop-off test (drop-off height4m,once per direction,totally 3 times) | dB | ΔIL≤ 0.3 |
| Conformance | TIA/EIA 604-3 |
Hangalaxy Workshop
Hangalaxy Exhibition Activities
Advantages of Mechanical Splicer
> Mechanical splices require no power supplies;
> Many mechanical fiber splice designs require no extra tools beyond a fiber stripper and fiber cleaver;
> They can be used in situations where fusion splicing is not practical or impossible;
> Mechanical splices can be made within a couple of minutes, this makes it ideal for temporary connections.
Packing Details for Reference (or Meet Customized Standard)
Outer Packing
| | Size (cm) | 49*32*32.5 | 49*32*17 |
| QTY (Gift Box/Box) | 50 | 50 |
| QTY (Pcs/Box) | 1000 | 1000 |
| N.W (KG/Box) | 6.8 | 3.4 |
| G.W (KG/Box) | 12 | 6.5kg |
| Applicable for | 3.1 x 2.0mm Drop cable,φ0.25 mm & φ0.90 mm Fiber |
| Optical fiber diameter | 125μm (652 & 657) |
| Tight buffer diameter (μm) | 250 μm |
| Fiber mode | Single & multi mode |
| Operation time | About 60s (no fiber cut) |
| Insert loss | ≤ 0.15dB (1310nm & 1550nm) |
| Return loss | ≤ -40dB |
| Fastening strength of naked fiber | >5 N |
| Fastening strength of naked fiber holder | >10 N |
| Repeatability (10 times) | △ IL ≤ 0.2dB △ RL ≤ 5dB |
Notes:
All materials are picked up from the source, 100% factory tested to ensure quality products.
Product Tags:
|
|
3.0mm DIN Fiber Optic Field Assembly Connectors / Apc Fiber Connector Images
|
